
Pay in installments of $5.58 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jun 29 - Jul 4
For Your Every Summer RSVP, with Code: SUMMER15
Description
electronic control gear for led modules Ver. 1 LED Sequencer, Sequential Flash Control Module, 14 Channel, GND – CorsoMotionSequential Control Module, 14 Channel, GND power control Ver 1. 00 each 300mA per channel Recommended parts Custom Made Boards Custom Made Board [7x2] 2P Bi Color, Lens ver. 600x600mil Custom Made Board [7x4] 2P Bi Color, Lens ver. 600x600mil Custom Made Board [7x6] 2P Bi Color, Lens ver. 600x600mil The ones below don't need the LENSes Custom Made Board [7x2] 4P Bi Color, Plain ver. 600x600mil Custom Made Board [7x4] 4P Bi Color, Plain ver. 600x600mil
Sequential Control Module,
14 Channel,
GND power/control Ver 1.00 | each
300mA per channel
Recommended parts
Custom Made Boards
Custom Made Board [7x2] 2P Bi-Color, Lens ver. 600x600mil
Custom Made Board [7x4] 2P Bi-Color, Lens ver. 600x600mil
Custom Made Board [7x6] 2P Bi-Color, Lens ver. 600x600mil
The ones below don't need the LENSes
Custom Made Board [7x2] 4P Bi-Color, Plain ver. 600x600mil
Custom Made Board [7x4] 4P Bi-Color, Plain ver. 600x600mil
Custom Made Board [7x6] 4P Bi-Color, Plain ver. 600x600mil
Bi-Color LED Strips
Bi-Color LED Strip, 4P x 19Ch, 15000x350mil
Side Support Panels
Support Panel Type-A
Support Panel Type-B
Modules
Sequential LED control module ver.1.10, for 1 color LED setup
Sequential LED control module ver.2.00, for 2 color LED setup
Pre-Cut wires
Pre-cut wire BLACK 22AWG 7.8inch/20cm
Pre-cut wire WHITE 22AWG 7.8inch/20cm
Pre-cut wire RED 22AWG 7.8inch/20cm
Pre-cut wire YELLOW 22AWG 7.8inch/20cm
Etc.
15 Pin Female header
40 Pin Male to Male wire 20cm
Basic functions
Sequential functions explained
Advantages of Using the Common Positive System in Automotive LED Lighting
In automotive LED lighting, the common positive system is widely used due to its numerous advantages. Here are some key reasons why this method is preferred:
🔹 1. Simplified Wiring and Reduced Costs
- In a common positive system, the vehicle chassis (metal body) serves as the ground (negative connection) for all electrical components.
- This reduces the need for additional negative wires, simplifying the wiring structure and lowering production and installation costs.
- It also minimizes wiring complexity, making it easier to maintain and troubleshoot.
🔹 2. Increased Reliability and Stability
- Since all components share a stable positive voltage source, voltage fluctuations are minimized, ensuring consistent LED brightness and performance.
- The chassis ground provides a low-resistance path, improving overall electrical efficiency and reducing the risk of connection failures.
🔹 3. Compatibility with Automotive Electrical Systems
- Most automotive electrical systems, including headlights, brake lights, and turn signals, use common positive wiring to maintain standardization across different components.
- This allows seamless integration of additional LED modules or aftermarket lighting without requiring major modifications to the vehicle's electrical system.
🔹 4. Better Protection Against Electrical Faults
- In case of a short circuit, the negative (ground) side is affected rather than the power supply, reducing the risk of damaging the entire system.
- This design helps protect LEDs and other electronic components from sudden voltage spikes and electrical failures.
🔹 5. Easier Integration with Control Modules
- Many LED controllers and dimmers used in automotive applications are designed to work with common positive configurations.
- This makes it easier to integrate RGB LED strips, DRLs (Daytime Running Lights), and other lighting systems without additional circuit modifications.
Conclusion
The common positive system in automotive LED lighting offers simplified wiring, improved reliability, compatibility with vehicle electrical systems, better fault protection, and easier integration with controllers. These advantages make it the preferred choice for manufacturers and aftermarket installers, ensuring efficient and stable LED lighting performance.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy